How to Clean Motocross Boots

Do you have motocross boots that need a little bit of love? To protect your feet and keep them in good condition, it is important to clean motocross boots after every ride. Here are some tips on cleaning them, so they look good as new! This guide will show you how to clean motocross boots quickly and easily.

First, use a brush to get all the dirt and mud off. Then, you can use soap and water to mix with a degreaser if needed. Next, let the boots dry completely. Once they are dry, apply a coat of boot protectant. This will help keep your boots looking shiny and new for longer! Read on for more information.

How to Clean Motocross Boots

Five Reasons Your Motocross Boots Get Dirty Overtime:

1. For Muddy or Wet Conditions:

If you ride in areas with a lot of mud or water, your motocross boots will inevitably get dirty. This can be easily remedied by using a hose to rinse off the boots after each ride. If you see the mud starting to cake, you can use a soft brush to remove it.

2. Riding in Dry and Dusty Road:

If you ride in dry, dusty conditions, your boots will also get dirty. The best way to clean them is to use a compressed air canister to blow the dust out of all the nooks and crannies. You can also use a soft brush to remove any stubborn dust particles.

3. After a Crash:

If you crash while riding, your boots will likely get scuffed up. You can use a soft cloth to wipe down the boots and remove any dirt or debris. If the scuffs are deeper, you can use a mild soap and water solution to clean them.

4. Weather Conditions:

If you live in harsh weather conditions, your motocross boots will also suffer. The best way to protect them is to store them in a cool, dry place when you’re not using them. You can also use a boot cover or bag to keep them clean and dry.

5. Cleaning the Outside:

To clean the outside of your boots, start using a soft brush to remove any caked-on dirt or mud. If you don’t have a brush, you can use a cloth or even your hand. Once most of the dirt is removed, you can use mild soap and water to clean the boots. Avoid using harsh chemicals or cleaners, as they can damage the materials of your boots.

10 Easiest Ways on How to Clean Motocross Boots:

1. Use a Brush to Remove Any Dirt or Mud:

The first step is to use a brush to get all the dirt and mud off your boots. This will help ensure that they are properly cleaned. If the dirt and mud are not removed, it could cause the boot to deteriorate over time. When removing the dirt and mud, be sure to use a soft brush, so you do not damage the boot.

Use a Brush to Remove Any Dirt

2. Use Soap and Water:

The next step is to use soap and water to clean the boots. You can also add a degreaser to the mixture if needed. Be sure to mix the soap and water before applying them to the boots. Next, use a brush to scrub the boots until they are clean. Be sure to pay extra attention to particularly dirty areas.

3. Rinse the Boots:

Once you have scrubbed the boots, it is time to rinse them off. Be sure to use clean water to rinse the boots. You may need to rinse them more than once to remove all the soap and water. If you think there is still soap or water on the boots, rinse them again.

4. Let the Boots Dry:

After rinsing the boots, let them dry in a well-ventilated area. Do not put the boots in direct sunlight, as this can cause the leather to crack. Be sure to let the boots dry completely before storing them away, as this will prevent mildew and bacteria from growing inside the boots.

5. Store the Boots Properly:

Once your motocross boots are dry, you will need to store them properly to keep them in good condition. First, store the boots in a cool, dry place away from direct sunlight. Then, if possible, store the boots in their original box.

If you don’t have the original box, store the boots in a breathable bag. Do not store motocross boots in plastic bags, as this can cause the leather to dry out and crack. When storing motocross boots for long periods, consider using cedar balls or mothballs to keep pests away.

6. Apply a Coat of Boot Protectant:

After your motocross boots are clean and dry, apply a coat of boot protectant. This will help repel dirt and mud and keep your boots looking new. Be sure to apply the protectant evenly, and avoid getting it on the inside of the boot where it can rub against your skin. If the coat you applied is too thick, it can make it difficult to get your foot into the boot.

Motocross Boots Are Clean

7. Let Your Boots Air Out:

Once you’ve applied the boot protectant, let your boots air out for a few hours or overnight before wearing them again. This will give the protectant time to dry and form a durable barrier against dirt, mud, and grime. If the boots feel stiff after the protectant has dried, you can use a boot conditioner to soften them up.

8. Remove Stains:

If you have any stains on your motocross boots, you can remove them by using a leather cleaner. Test the leather cleaner on a small area of the boot first to make sure it doesn’t damage the leather. Next, apply the cleaner to a soft cloth and rub it into the stain. Then, wipe the area clean with a damp cloth.

9. Use a Degreaser to Remove Any Tough Stains:

If you have any tough stains on your motocross boots, you can remove them using a degreaser. Degreasers are designed to break down tough stains and remove them from surfaces. You can find degreasers at most hardware stores or online. To use a degreaser, apply it to the stained area and scrub it with a brush. Once the stain has been removed, rinse the area with water.

10. Polish Your Motocross Boots:

If you want to polish your motocross boots, you can use a boot polish. Boot polish is designed to protect and shine leather. You can find boot polish at most shoe stores or online. Simply apply it to a soft cloth and rub it into the leather to use boot polish. Once the boot polish has been applied, buff the boots with a soft cloth.

Tips to Care For Your Motocross Boots:

1. Pre-treat your motocross boots with a boot protector before riding. This will help keep them clean and prolong their lifespan.

2. If your motocross boots get muddy, use a soft brush to remove any caked-on mud. Do not use harsh chemicals or cleaners as this can damage the leather.

3. When cleaning the inside of your motocross boots, use a soft cloth dampened with water. You can also use a mild soap if needed. Be sure to remove all dirt and debris from the footbeds to prevent any irritation.

Motocross Boots  Air Dry at Room

4. Let your motocross boots air dry at room temperature. Avoid placing them in direct sunlight or near a heat source, which can cause the leather to crack.

5. Once your boots are dry, apply a leather conditioner to help keep them supple and looking new.

6. Make sure you store your motocross boots in a cool, dry place when not in use. Avoid storing them in humid areas, as this can cause the leather to degrade over time.

7. Inspect your motocross boots regularly for any signs of wear and tear. If you notice any damage, have them repaired as soon as possible to prevent further issues.

By following these simple tips, you can keep your motocross boots looking and performing their best for many rides to come.

How Can I Make My Mx Boots Smell Better?

If your motocross boots are starting to smell a little funky, don’t worry – you can easily clean them and make them smell better with just a few simple steps. First, remove the boot liners (if they’re removable) and set them aside. Next, use a brush or sponge to scrub the inside and outside of the boots with mild soap and water.

Remove the Boot Liners

If you’re having trouble getting rid of tough stains or odors, you can try using a stronger cleaning solution like bleach or vinegar. Once you’ve scrubbed the dirt and grime, rinse the boots off with clean water and let them air dry completely before putting the liners back in. You can sprinkle a bit of baking soda inside the boots for an extra fresh smell before putting the liners back in.


Motocross boots are important gear for anyone who rides a dirt bike. They protect against the elements and keep your feet safe and comfortable while you ride. It’s important to clean motocross boots after every ride to extend their life and keep them looking new.

Cleaning motocross boots may seem daunting, but with the right supplies and some elbow grease, it can be done in no time. By following these simple steps on how to clean motocross boots, your boots will look and feel like new again. Have you tried cleaning your motocross boots this way? Let us know how it went in the comments below.

Darren Matlock

Darren Matlock

Hi, I'm Darren. I love dirt bikes and everything about the off-road lifestyle. I'm passionate about motorbikes, cars, racing sports and going on adventures. If you're like me and enjoy extreme sports, you've come to the right place! I like to write articles about dirt bikes to help beginners get started. Whether you're interested in buying a dirt bike, ATV, motorcycle or want to ride for hobby, I hope my articles will inspire you to learn more about how this machine can be used to ride.

We will be happy to hear your thoughts

Leave a reply

Dirt Bike Moto