How to Put Lights on a Dirt Bike Without a Battery
If you are looking for a way to put lights on your dirt bike, but don’t have the money or time to buy and install a new battery, then this post is for you! We will cover how to put lights on a dirt bike without a battery in detail. It’s not as hard as it may seem at first glance. In fact, we’ll show you some of our favorite tricks that make installing lights easy and affordable.
- Two 12V lights
- Wire connectors:
- Wire strippers
- Zip ties
- Wire crimps
- Electrical tape
- Electrical connectors
- Electrical test light
Things to Consider Before Putting Lights On Dirt Bike
The first step in putting lights on a dirt bike without a battery is to know what type of light you are looking for and if it will be necessary. The basic types of lighting include headlights, taillights, and turn signals.
L.E.D.’s have revolutionized the way people think about their safety when riding at night time with recent innovations in L.E.D. Technology. The lights on a dirt bike are attached to the wiring harness of the vehicle and can only be installed with knowledge about electricity or using an electrician.
In order to install L.E.D.s onto your bike without a battery, you will need to find out what type of power supply you have available. There is no universal adapter that works with all types of setups but there are adapters that work well in most cases.
Types of Lights You Can Put on Dirt Bike
If you want to know how to put lights on a dirt bike without a battery, there are many ways of doing it. You can use anything that will create light and produce enough power for the lamp: water-resistant matches, cigarette lighter, torch, or flashlight with some spare batteries.
These products all have their own pros and cons, but they should be sufficient in most cases. One thing to note is that when using any type of combustible material like footlights, you need an appropriate container such as a metal bucket or similar so that if something goes wrong while lighting them up, then no one gets hurt by sparks flying around.
There are also other types of lamps that don’t require fuel at all; these usually consist of L.E.D. Bulbs that are highly powered. L.E.D.’s are exceptionally bright and can be seen from a long distance, so while they might not be necessary for headlights on dirt bikes, L.E.D. Taillights have become the standard.
Instructions: How to Put Lights on a Dirt Bike Without a Battery
Step One: Mount the lights on your bike.
Those of you who have a dirt bike with O.E.M. lighting will find that there is usually an easy way to mount the new battery-operated lights onto your frames. You may need some zip ties or wire crimps, but it’s not too difficult to get them securely in place.
Electrical tape is helpful for hiding any wires that are visible. If you’re using a bike without O.E.M. lighting, then it’s even easier to mount the lights because we don’t need to worry about finding compatibility with existing wiring and mounting points on the frame.
Step Two: Connect your battery-operated lights to the power supply
Now that the lights are mounted, we just need to connect our battery-operated light(s) to the power supply. This is a lot easier than it sounds – all you have to do is plug in one side of the wire into your bike’s frame and then clip on the other end onto your new battery-powered lighting system.
Step Three: Close the lid and put your bike back together.
Now that you’ve mounted lights on a dirt bike without a battery close the lid and put your bike back together! When it comes to mounting points for L.E.D. Lighting systems like this one, there are two main options – welded tabs or clips. There’s no right answer when deciding which way is better; it really just depends on what works best for you.
The easiest thing to do would be using crimp connectors, but it’s not too difficult to get them securely in place. The electrical tape helps hide any visible wires. If you’re using a bike without O.E.M. lighting, it’s even easier to mount the lights because we don’t need to worry about modifying the bike’s wiring.
Step Four: Update the Bike’s Wiring
Once we’ve mounted our lights on a dirt bike without a battery, it’s time to update the wiring.
The most challenging part of this step is running wires through the frame and ensuring that they’re protected from abrasion and environmental elements. There are three main ways that you can do this: P.V.C. pipe insulation, metal conduit tubes designed for wire protection, or using electrical tape around your wires where needed. If you have any doubts about how well these methods will protect your cables, then go with option two (metal conduit).
Step Five: Mounting Brackets & Electrical Connections
Once we’ve got wires running to where the lights are mounted, it’s time to mount the brackets and make our electrical connections. This is where the most creative part of this project comes in.
When you’re making your connections, it’s time to think about how we are going to power these lights up as well and whether or not there will be a spot on our dirt bike that can easily charge the battery for us. This could also include adding an auxiliary lighting system, which many people like because they don’t need to worry so much about their main source of light running out while riding at night.
Tips & Tricks for Successfully Installing Lights on Dirt Bike
Tip #01: Purchase a Battery Eliminator Kit (B.E.K.)
Tip #02: Buy the right lights for your bike
Tip #03: Get a battery pack or power adapter to run the lights with an external power source.
Tip #04: Wire up your light according to their instructions, using appropriate wiring and connectors.
Some Other Methods You Can Use
- You can use a car battery to power the lights. The downside of this is that it will drain the battery from your vehicle.
- For headlights, you can install them on a metal pole and hook up wires so they work like normal bulbs. You may need an inverter to make sure no voltage fluctuations happen with these sets of lights.
- If you don’t want to spend money on wiring or batteries for your bike, there are some other ways, such as using L.E.D.s, which last longer than regular incandescent light bulbs (but require more maintenance).
Frequently Asked Questions
Can You Add Lights to a Dirt Bike?
Yes, you can add lights to a dirt bike without the battery. The charge pack on some dirt bikes is like an inverter for your car’s 12-volt battery, and it has enough power to run accessories such as L.E.D. Headlamps or auxiliary lighting.
Where Do You Put the L.E.D. Lights?
A. The best place to put lights on your motorcycle is in between the bars where there are some gaps for airflow, such as headlight brackets. This will allow proper cooling and reduce strain on wiring components due to vibration while also giving off additional light when needed.
L.E.D. headlights are great because they emit brighter colors which make seeing at night easier & less eye-straining than with normal halogen headlights (which aren’t so good). In addition, L.E.D.s do not produce heat that may melt plastic lenses or fog up goggles like H.I.D.s do – making them safer too! All of these benefits combined make L.E.D.s the best choice.
How Far Apart Should The L.E.D. Lights Are?
Generally, it’s a good rule of thumb to have them about 12 inches apart from each other when mounted on dirt bikes for visibility and safety in low light conditions. This is also based on what size your motorcycle has & how much clearance you will need between front wheels, as well as the power output of headlights (such as H.I.D. vs. halogen). If you’re not sure, then we recommend experimenting with different distances until you find one that works best!
What Is the Lifespan of Bike Battery?
The lifespan of your bike battery is dependent on how much use it gets and the environment in which you store it as well as the quality of the battery itself (i.e., maintenance). When a charger or electrical system becomes faulty, this takes an additional toll on the life expectancy of the battery, so we recommend getting these fixed ASAP to ensure that they live up to their full potential!
You may be wondering how we were able to put lights on a dirt bike without a battery. Well, the answer is simple, there are many ways! We’ve already discussed some ways on how to put lights on a dirt bike without a battery in this blog post and talked about some tips and tactics.
However, if you want something more permanent than that or don’t have any spare batteries around the house, then try wiring them indirectly with an electrical system from your car!
You may read also: