How to Oil Dirt Bike Air Filter
Introduction
Everyone knows that oil is an essential part of running a car, but few people know how important it is to the dirt bike. Dirt bikes need lots of lubrication because they are generally moving parts and get dirty fast.
The air filter on your dirt bike protects the engine from dirt and debris in the air, which would otherwise cause wear or damage to the engine. It also allows more oxygen for fuel combustion into your engine, so you can go faster than you could without one! However, without regular care (read: cleaning), this filter will become clogged with dust and lose its ability to let clean air through, meaning less power for you! The best way to protect your investment? Oiling it regularly. For this reason, today, I will discuss a technique on how to oil dirt bike air filters.
A Process on How to Oil Dirt Bike Air Filter
If you are into dirt bikes, especially ones used outdoors, one needs to make sure that proper maintenance is performed. Aside from the usual cleaning of the bike, which includes washing it after each use, another important process is oiling your air filter. This article will teach you how to oil dirt bike air filters correctly not to damage your bike or hurt yourself while doing it.
To do this properly, there are six simple steps that you need to follow:
- The First step would be checking for contamination on the surface of the air filter. Air filters accumulate dust particles with time and, if not removed, can block airflow, causing your engine problem. Cleaning it regularly using a compressed air gun will do the trick.
- The second step is removing the old oil from the air filter and reinstall a new one if necessary.
- The third step is preparing to oil can with 2-stroke engine oil, which contains a mixture of a 20:1 ratio of gas to oil. This kind of thing will be beneficial in lubricating your fuel system and cleaning purposes. For a dirt bike, you need not use too much, just enough to cover most parts.
- The fourth step would be spraying it on the whole air filter surface evenly until covered, then let sit for 24 hours so that it can thoroughly penetrate all areas. After the wait, wipe clean excess oil from the surface using a clean rag or paper towel. Do not wipe it thoroughly to prevent oiling the dirt bike engine.
- The fifth step is reinstalling and reassembling the air filter using your hands. Please do not use any tools for this as they can damage its surface. This will complete the process of how to oil dirt bike air filters correctly.
- Do a test run to check if everything is working properly after doing this maintenance task, then have fun driving your bike around!
How to Take Care of Your Dirt Bike: What You Should Know?
Keep Your Dirt Bike In Perfect Condition With These Tips
Like any other machine, a bike needs to be taken care of if you want it to last. Obviously, just riding the bike won’t take care of all parts. Unfortunately, many people don’t know a lot about their dirt bikes, which leads to problems later on when they try to fix them without knowing what is wrong with them. Do not let this happen to you! Take the time now to learn how you can keep your dirt bike in great working order with these tips:
How Often Should I Change My Oil?
Changing your oil is an important part of maintaining your dirt bike. It’s rather simple and doesn’t have much room for error, so it’s a good idea to know this before you start; it will save your time and money. Also, the type of oil used is essential, as the dirt bike engine has a lot of pressure pushing down on it.
How to Clean Dirt Bike Air Filter?
A ubiquitous question raised by most dirt bike riders is: how to clean a dirt bike air filter? So, you may ask, why do I need an air cleaner on my dirt bike? The answer is simple. Dirt bikes produce much unburnt fuel and oil that form a paste in the air filter box. This mixture can clog up the carburetor, which causes your motorcycle to overheat. Not only this, but it also makes your motor emit black smoke while running, which further pollute the environment. So if you want a clean biking experience and safe riding without harming our environment, it’s time to learn how to oil the dirt bike air filter for cleaning!
How Often Should You Clean Your Air Filter?
Air filter cleaning is an important maintenance step that should be done regularly. There are different theories regarding the frequency of air filter cleaning, but some consider it good to clean it every time after you finish your ride and before you start again. It’s considered better than over-oiling as it doesn’t clog up your carburetor and affect its functioning.
Air Filter Maintenance Do’s and Don’ts
- If you ride on dirt roads, clean your air filter weekly or after every trail ride. Dirt and dust will clog the paper element, reducing its effectiveness in filtering out fine particles of dirt, which are harmful to engine components.
- Clean your air filter with a high-quality soap and water solution to remove oil film buildup. An easy way to do this is to use dishwashing liquid like Dawn or Palmolive mixed with warm water in a bucket large enough to submerge the dirty filter elements fully. Next, turn over each piece of the air filter assembly so that both sides get cleaned, then rinse thoroughly by letting it soak for a few minutes while floating pieces in the cleaning solution draining off the excess liquid through holes in the airbox.
- Allow the filter to drip-dry in a clean, well-ventilated area before installing it back on your bike.
- Never use compressed air to dry your air filter! You could risk damaging the delicate fine mesh of the paper element by forcing water through the tiny holes that create its filtering capacity. Instead, remove both sides of the airbox and wipe off excess moisture with paper towels or shop rags. Cover one side and let it sit at room temperature for several hours before reinstalling it (sitting upright on a clean towel) to ensure all excess water is completely evaporated out of its internal cavities.
Final Thoughts
When you are tracking a dirt bike, the air filter will get dirty and clogged fast. The larger the engine of your dirt bike is, the faster it will fill up with dust. Your tailpipe may start to collect soot as well due to less exhaust leaving the engine because of this packed dirt in the air filter. So oiling the air filter will surely help reduce the hassle. We hope the process mentioned here will ease your riding. Thank you, and have a good day.
Darren Matlock
Hi, I'm Darren. I love dirt bikes and everything about the off-road lifestyle. I'm passionate about motorbikes, cars, racing sports and going on adventures. If you're like me and enjoy extreme sports, you've come to the right place! I like to write articles about dirt bikes to help beginners get started. Whether you're interested in buying a dirt bike, ATV, motorcycle or want to ride for hobby, I hope my articles will inspire you to learn more about how this machine can be used to ride.
