How to Put a Speedometer on a Dirt Bike

If you are looking for a way to measure your speed on a dirt bike, then this is the guide for you. You will learn how to put a speedometer on a dirt bike without any special tools or skills.

There is also some information on how to attach it so that it stays securely in place as well as how to calibrate it. This article has been written with beginners in mind and will take a little time but should be relatively easy for anyone with basic mechanical knowledge.

How to Put a Speedometer on a Dirt Bike

Materials Required

  • Dirt Bike Speedometer/Tachometer
  • Screwdriver
  • Ratchet Wrench with Extension Attachment. (For example, a Crescent Hand Tool Set.)
  • Drill and drill bits for small holes in metal or plastic parts

Methods To Follow – How to Put a Speedometer on a Dirt Bike

Method One: Attaching the Speedometer to Your Bike

Dirt bikes are different from other types of motorcycles because they have a lower profile, which leaves less space for mounting. This means that some options will not be available, and you may need to improvise in order to attach your speedometer securely on your dirt bike without it falling off.

Method Two: Installing Your Speedometer on Your Bike

Before installing your new tachometer, you should look at your bike’s dashboard and see if there is any room in front or behind it that might work as an attachment point. If not, then you will need to drill holes into either the metal frame of your motorcycle or into plastic parts such as brackets or fenders where they attach with screws.

Method Three: Mounting Your Speedometer

It’s important to be sure that your speedometer is mounted securely, so it does not fall off while you’re riding. You can use thick rubber bands, zip ties, or even an old shoelace threaded through the dashboard and around the back of the mounting post on your tachometer for extra security.

Method Four: Attaching Your Speedsensor in Front of The Handlebars

If there is no room in front of your motorcycle’s dashboard, then find a spot below it where you will be able to attach a bracket onto either metal or plastic parts with screws. If attaching it behind the handlebars is more practical than securing one at eye level on top, then do it!

Method Five: Attach A Bracket To Either Side Of Where You Want It Mounted 

Now you will need to attach the bracket onto either side of where it is going to be mounted on your bike. One bracket will be required on the handlebars and another one for your speedometer. Zipties, rubber bands, or shoelaces can all work to hold this in place if you are worried about any of the above becoming loose.

Note: You can use any combination of those methods as long as they hold on tightly without falling off or getting loose over time. It would help if you also took care while handling them so that they do not get scratched up from being knocked around too much during installation.

Frequently Asked Question

How Does Digital Speedometer Work?

Digital speedometers work by measuring the time it takes for an object to move a given distance. This can be accomplished with mechanical or analog sensors such as photo-sensitive cells and photodiodes that convert light into electricity in order to determine how long objects take to go from one point on a strip of film or sensor to another.


Should You Put a Bicycle Speedometer on a Dirt Bike? 

hat’s up to you, but it is not recommended. The reason being that the power needed for an analog or digital speedometer can drain too much energy from your battery and make it difficult to start your motorcycle when it’s time to leave. This would be true in any type of motorcycle.

The more accurate your speedometer is, the better chance you have at not getting into a wreck on the highway because it will be easier for you to know when you need to slow down and take turns.

If this matters the most in your decision about whether or not to put a bicycle speedometer on a dirt bike, then go ahead and put it on.

How Much a Dirtbike Speedometer Cost?

Speedometers can cost anywhere from $25 to $500. As you might have guessed, the more expensive ones are going to be of better quality and will last longer than a cheaper one would.

The type of speedometer that is best for your dirtbike depends on what kind of dirtbike it is as well as how much money you want to spend.

The cheapest speedometers you can get are usually a mechanical pedal-operated device. You have to move your foot back and forth in order for it to work, which is why they’re cheap, but if that’s not what you want, then there are also digital ones as well with buttons on them, so all you need do is push the button and it will beep.

You Can Check It Out To Dirt Bikes Have Speedometers

Conclusion

If you’re wondering how to put a speedometer on a dirt bike, it’s not that hard. All you need is some basic knowledge of the process and an hour or so to work.

With our help, we’ve provided everything you’ll need for this project, including detailed instructions and the necessary tools! We hope this information helps. If you have any questions about speedometers, then don’t hesitate to let us know.

You may read also –

How to Unseize a Dirt Bike Engine

We will be happy to hear your thoughts

Leave a reply

Dirt Bike Moto
Logo